3D Movies Can Truly Come Alive With XGIMI
Imagine enjoying the thrills, color, and action of your favorite 3D movie from the comfort of your living room or in your backyard at night – it can be surreal. 3D movies add depth to the average movie experience, taking you on a journey into an imaginary world. Thanks to XGIMI smart projectors, the rainbow-colored flying creatures in Avatar or the Jaegers in Pacific Rim can come alive in your living room, bedroom, or on a starry night in your backyard.
The 3D feature on XGIMI smart projectors is easy to set up, and you can configure it by clicking a few buttons on the remote controller. XGIMI's 3D feature is powerful, immersing you in your favorite 3D movie with stunning visuals. Not only is XGIMI's 3D feature easy to set up, but you can also pair their products with cool XGIMI 3D glasses to take the 3D movie experience to new heights.
This article will explain how to set up the 3D feature on your XGIMI projector and teach you how to use your XGIMI 3D glasses. In this article, we will recommend XGIMI smart projectors with 3D mode and the XGIMI Active Shutter 3D glasses for projectors and learn how they transform 3D movies.
How to Set Up The 3D Feature on Your XGIMI Projector
Here's a short guide on how to activate and use the 3D feature on your XGIMI 3D projector:
- When playing or streaming a 3D movie or video, click the "Shortcut" button on your projector's remote controller.
- Select '3D Video Setup'.
- Select the corresponding 3D mode (up/down 3D mode or left/right 3D mode).
- You will know that the 3D feature is enabled when the images combine and the display becomes blurry.
- On your XGIMI 3D glasses, adjust the buttons until you can see a clear image. Charge your 3D glasses before use. Please also ensure that your XGIMI 3D glasses are fully charged.
Note that using the XGIMI 3D glasses is recommended for an ideal viewing experience.
How to Use Your XGIMI 3D Glasses
To enable the XGIMI 3D glasses:
- Press the power button once to turn them on.
- Press a second time to adjust the image quality, and repeat until the image is clear.
- When playing 3D movies on your projector, you must choose between the 'up/down 3D' and 'left/right 3D' effects to optimize your viewing experience.
The following guide will help you use your XGIMI 3D glasses for projectors ideally:
- Charging time: The 3D glasses take around two to three hours to get a full charge.
- Power on: Press the power button to turn on the 3D glasses. A green LED light will flash to indicate that the glasses are on.
- Power off: After use, long-press the power button for three seconds to turn the 3D glasses off. The glasses will go off after the green LED light flashes thrice.
- Standby status: The glasses will switch to standby mode After five seconds without detecting a 3D signal. During standby mode, the green LED light will flash every five seconds.
- USB charging: During charging, a red indicator light will appear. The red light goes off when the glasses are fully charged.
- Low battery mode: The green LED light will flash five times, then twice every ten seconds, when the 3D glasses are low on battery.
XGIMI Smart 3D Projectors and Accessories for a Breathtaking Experience
article_product1
article_product2
article_product3
Choose XGIMI For an Immersive 3D Movie Experience
With XGIMI projectors for 3D movies, you can travel the planet of Pandora with the Na'vi in Avatar or fight some Kaiju monsters in Pacific Rim, all from the comfort of your living room or while on a camping trip.
