MoGo 4 Laser

Product Notes:

1. When connected via HDMI, the device supports HDR 10 but not HDR 10+.

2. Brightness (light output) will vary depending on usage conditions. White light output is measured according to ISO 21118. The nominal value represents the average value of mass-produced units and is tested under ideal laboratory conditions in Performance Mode/High Power Mode. In Performance Mode, the highest brightness is achieved, which may result in some color differences compared to the default viewing mode. Additionally, the fan speed may increase, potentially causing noise. This is normal. For regular viewing, it is recommended to use other brightness modes.

3. Refers to the color gamut area coverage under the BT.2020 standard. This data is from the XGIMI laboratories. Actual color gamut coverage varies depending on the individual product.

4. The Eye Protection function is disabled in default settings and can be enabled in the system settings.

5. To ensure accurate calibration, the side throw angle should not exceed 25° (degrees). The display quality may vary based on product usage habits and environmental conditions. Due to the complexity of the environment, Uninterrupted Auto Keystone Correction may fail, and manual correction may be required.

6. For the best viewing experience, we recommend using a projection size of 60-120 inches. Exceeding this range may affect the quality of your projected content. The display quality may vary based on product usage habits and environmental conditions.

7. The actual storage capacity is subject to change based on various factors, such as system usage, software version, and settings used.

8. Wi-Fi 5 indicates the version of the wireless network protocol supported by the device, and it can be used with wireless routers and other equipment that support the corresponding protocol version. Network speed is influenced by various factors; please refer to actual conditions for precise performance.

9. The projector's Bluetooth supports connection with mobile phones in Creative Filter and Ambient Light Mode.

10. When using a third-party power bank or adapter, it needs to ensure an output power between 65W and 150W and meet the following power, current, and voltage requirements: 65W at 20V/3.25A, 100W at 20V/5A.

11. Measured under an ambient temperature of 25°C with a 1-meter distance from the machine. Results may vary based on different testing environments, conditions, and the product being evaluated. This data comes from XGIMI laboratories.

12. In Eco Mode, the built-in battery provides up to 2.5 hours of video playback. Stream music for up to 6 hours with all projector lighting features off and the volume level at or below 50%. The projector will automatically enter Eco Mode upon startup if it's not plugged in. For a brighter display, you can exit this mode, but playtime will be reduced.

13. The actual size may vary based on configuration, manufacturing, and testing method.

14. The actual weight may vary based on configuration, manufacturing process, and testing method.

15. The power adapter uses XGIMI's proprietary charging protocol and is exclusively for powering the XGIMI MoGo 4 series projectors. Do not use it to charge other devices, as this may cause performance issues.

16. The Mini remote control contains a coin cell battery. Keep it out of reach of children to prevent accidental ingestion, as this can cause chemical burns. Serious burns can occur within two hours and may be life-threatening. If the battery compartment is not securely closed, stop using the product immediately. If you suspect a battery has been swallowed, seek medical attention right away.
For the best experience, we reconmmend taking off the Mini remote and point the side with the black strip (infrared sensor) toward the projector. When you're done, just hang it back to keep it from getting lost

17. The Magnetic Creative Filter is designed to enhance the ambiance. Blurred edges and distortion are normal effects during use. We do not recommend using it for watching movies. For the optimal effect and experience, the Magnetic Creative Filters are best used in low-lit environments.

18. Two ways to activate Ambient Light Mode:
A. When the projector is off and closed, long-press the power button for 2–3 seconds to activate Ambient Light Mode.
B. Use the shortcut button on the remote control to access Ambient Light Settings. Change "Retract" to "During the retracting process, the device wil enter Ambient Light Mode." Ambient Light Mode only supports playing Bluetooth music and does not support playing projector music.

19. The PowerBase Stand needs to be purchased separately but is more cost-effective when bought together with the projector. With both the MoGo 4 Laser and PowerBase Stand fully charged, enjoy up to 5 hours of movie playback. When the light engine is powered off, it can stream music for 12 hours at below 50% volume.

* Actual product features and specifications (including appearance, color, and size) and actual display aspects (including backgrounds, interface, and icons) may vary by country. Please consult the point of sale for further information.
* All performance data in the preceding pages are theoretical values obtained by XGIMI internal laboratories through tests conducted under particular conditions. Refer to the aforementioned product details for more information on the specific testing conditions. Actual performance may vary based on individual product configurations, software versions, application conditions, and environmental factors. All data is subject to actual usage.
* XGIMI makes every effort at the time of publication to ensure the accuracy of the product information it provides. Due to subsequent changes involving product batches, production, and supply factors, it may be necessary for XGIMI to make changes and adjustments to text and images so that they match the performance, specifications, indexes, and components of the actual product. Product information is subject to such changes and adjustments without notice.
* Operating temperature: 32°F to 104°F
* All parameters listed on this page are measured in an XGIMI internal test environment for mass production. User experiences may vary in different settings, usage conditions, software versions, etc. Please check the official XGIMI website for detailed test standards and data.
* The product includes a printed manual. However, the electronic manual will be updated on the XGIMI website. If there is any discrepancy or conflict between the printed and the electronic manual, please refer to the latest electronic manual on the official website.
* We advocate for environmental sustainability and paper conservation. For instructions in various languages, please scan the QR code of the printed manual or download the electronic version. If you have any questions during use, please contact us via service-usa@xgimi.com.