1. Brightness (light output) will vary depending on usage conditions. White light output is measured according to ISO 21118. The nominal value represents the average value of mass-produced units and is tested under ideal laboratory conditions in Performance Mode/High Power Mode. In Performance Mode, the highest brightness is achieved, which may result in some color differences compared to the default viewing mode. Additionally, the fan speed may increase, potentially causing noise. This is normal. For regular viewing, it is recommended to use other brightness modes.
2. 99% DCI P3 is the color gamut coverage of DCI P3 under the 1976 color gamut standard. This data is from the XGIMI laboratories. Actual color gamut coverage varies depending on the individual product.
3. With a projection ratio of 0.177:1, AURA 2 displays a 100-inch image just 17.8 cm from the wall.
4. When using Uninterrupted Auto Keystone Correction, you need to disable the "Intelligent Screen Assist" in the system settings; Under normal circumstances, UST projectors do not require side projection. To ensure the accuracy of the calibration, it is recommended that the tilt angle of the projector body does not exceed ± 9 degrees. Due to the complexity of the environment, Uninterrupted Auto Keystone Correction may fail, and manual correction may be required.
5. Scan a QR code to start Wall Flatness adaption. The projection wall should be a regular painted surface, and it does not support wallpaper, dirt, or walls with other decorations.
6. The Wall Color Adaption feature needs to be enabled in the system settings to take effect. Once activated, it can calibrate the picture based on wall colors with a color temperature ranging from 3000K to 15000K. However, the calibration effect may vary depending on the wall color. For optimal results, we recommend using it in dimly lit environments.
7. The Screen Alignment Assist feature needs to be enabled in the system settings to take effect. Move the projector so that the four sides of the projected image exceed the screen edge, and AURA 2 will automatically adjust for perfect fit. For optimal picture ratio and coverage, use the official XGIMI ALR screen for better recognition (avoid screens with white frames). During alignment, turn off overhead lights to prevent interference with the alignment process.
8. The Eye Protection function can be enabled or disabled in the system settings.
9. Refers to dynamic contrast ratio.
10. The typical value of ΔE＜1 for color accuracy in the factory production of XGIMI AURA 2 is obtained from the XGIMI Optical Laboratory. The calibration parameters will take effect when the high color accuracy mode is correctly activated in the system. Color accuracy may vary slightly depending on factors such as projection usage time and lab testing equipment. Please refer to your actual experience for an accurate assessment.
11. SGS Certification Number: PT/24/GEN/0233.
12. For the best viewing experience, we recommend using a projection size of 90-130 inches. Exceeding this range may affect the quality of your projected content. The display quality may vary based on product usage habits and environmental conditions.
13. This product is an electronic device; always keep the lens dry to prevent damage to the equipment.
14. 20,000 hours is the theoretical lifespan of the light source. The actual lifespan may vary due to differences in environmental conditions, product usage, and the mode selected.
15. The actual storage capacity is subject to change based on various factors, such as system usage, software version, and settings used.
16. Wi-Fi 6 indicates the version of the wireless network protocol supported by the device, and it can be used with wireless routers and other equipment that support the corresponding protocol version. Network speed is influenced by various factors; please refer to actual conditions for precise performance.
17. Measured under an ambient temperature of 25°C with a 1-meter distance from the machine. Results may vary based on different testing environments, conditions, and the product being evaluated. This data comes from XGIMI laboratories.
18. The actual size may vary based on configuration, manufacturing, and testing method.
19. The actual weight may vary based on configuration, manufacturing process, and testing method.

* Actual product features and specifications (including appearance, color, and size) and actual display aspects (including backgrounds, interface, and icons) may vary by country. Please consult the point of sale for further information.
* All performance data in the preceding pages are theoretical values obtained by XGIMI internal laboratories through tests conducted under particular conditions. Refer to the aforementioned product details for more information on the specific testing conditions. Actual performance may vary based on individual product configurations, software versions, application conditions, and environmental factors. All data is subject to actual usage.
* XGIMI makes every effort at the time of publication to ensure the accuracy of the product information it provides. Due to subsequent changes involving product batches, production, and supply factors, it may be necessary for XGIMI to make changes and adjustments to text and images so that they match the performance, specifications, indexes, and components of the actual product. Product information is subject to such changes and adjustments without notice.
* Operating temperature: 32°F to 104°F.
* All parameters listed on this page are measured in an XGIMI internal test environment for mass production. User experiences may vary in different settings, usage conditions, software versions, etc. Please check the official XGIMI website for detailed test standards and data.
* The product includes a printed manual. However, the electronic manual will be updated on the XGIMI website. If there is any discrepancy or conflict between the printed and the electronic manual, please refer to the latest electronic manual on the official website.
* We advocate for environmental sustainability and paper conservation. For instructions in various languages, please scan the QR code or download the electronic version. If you have any questions during use, please contact us via service-usa@xgimi.com.